What is the use of Rs 232?

An RS-232 serial port was once a standard feature of a personal computer, used for connections to modems, printers, mice, data storage, uninterruptible power supplies, and other peripheral devices.

Thereof, what is an RS 232 cable used for?

RS-232C. RS-232 stands for Recommend Standard number 232 and C is the latest revision of the standard. The serial ports on most computers use a subset of the RS-232C standard. The full RS-232C standard specifies a 25-pin “D” connector of which 22 pins are used.

What is a rs232 port?

As said before RS232 is a serial interface. It can be found in many different applications where the most common ones are modems and Personal Computers. All pinning specifications are writen for the DTE side. All DTE-DCE cables are straight through meaning the pins are connected one on one.

How far can you run rs232 cable?

Maximum cable lengths. Cable length is one of the most discussed items in RS232 world. The standard has a clear answer, the maximum cable length is 50 feet, or the cable length equal to a capacitance of 2500 pF. The latter rule is often forgotten.

What is a UART interface?

A UART (Universal Asynchronous Receiver/Transmitter) is the microchip with programming that controls a computer’s interface to its attached serial devices.

How does the UART work?

In UART communication, two UARTs communicate directly with each other. The transmitting UART converts parallel data from a controlling device like a CPU into serial form, transmits it in serial to the receiving UART, which then converts the serial data back into parallel data for the receiving device.

What is the use of UART in microcontroller?

Universal asynchronous receiver-transmitter. A UART is usually an individual (or part of an) integrated circuit (IC) used for serial communications over a computer or peripheral device serial port. One or more UART peripherals are commonly integrated in microcontroller chips.

What is the function of UART?

UART is a digital protocol which we use to transfer data between two devices. A universal asynchronous receiver/transmitter (UART) is a block of circuitry responsible for implementing serial communication. Essentially, the UART acts as an intermediary between parallel and serial interfaces.


UART = Universal Asynchronous Receiver/Transmitter. A TTL UART will output (and input) only TTL levels, essentially 0 bit = 0V and 1 bit = 5V. And many modern-day gadgets (Arduino, et.al.) simply use TTL voltage levels for serial communication.

What is meant by TTL logic?

Transistor-transistor logic (TTL) is a digital logic design in which bipolar transistor s act on direct-current pulses. Many TTL logic gate s are typically fabricated onto a single integrated circuit (IC). A TTL device employs transistor s with multiple emitters in gates having more than one input.

What is rs232 TTL?

This method of serial communication is sometimes referred to as TTL serial (transistor-transistor logic). Serial communication at a TTL level will always remain between the limits of 0V and Vcc, which is often 5V or 3.3V. A logic high (‘1’) is represented by Vcc, while a logic low (‘0’) is 0V.

What is UART and TTL?

RS-232 (Recommended Standard 232) is a standard for serial binary data signals connecting between a Data Terminal Equipment (DTE) and a Data Communication Equipment (DCE). It is commonly used in computer serial ports. One of the significant differences between TTL level UART and RS-232 is the voltage level.

What is a TTL converter?

The USB TTL Serial cables are a range of USB to serial converter cables which provide connectivity between USB and serial UART interfaces. A range of cables are available offering connectivity at 5V, 3.3V or user specified signal levels with various connector interfaces.

What is meant by TTL signal?

Normal TTL signals are single-ended, which means that each signal consists of a voltage on one wire, referenced to a system ground. The “low” voltage level is zero to 0.8 volts, and the “high” voltage level is 2 volts to 5 volts. A differential TTL signal consists of two such wires, also referenced to a system ground.

What is TTL voltage level?

However, real TTL gate circuits cannot output such perfect voltage levels, and are designed to accept “high” and “low” signals deviating substantially from these ideal values. “Acceptable” input signal voltages range from 0 volts to 0.8 volts for a “low” logic state, and 2 volts to 5 volts for a “high” logic state.

What is RTL logic?

Resistor–transistor logic (RTL) is a class of digital circuits built using resistors as the input network and bipolar junction transistors (BJTs) as switching devices.

What is ECL and TTL?

Emitter Coupled Logic (ECL), also referred to as Current Mode Logic families, is a digital technology with extremely high-speed. Transistors are not allowed to go into deep saturation thus, eliminating storage delays like in TTL logic families. Transistors are driven either in cut off or in active region.

What is a CMOS gate?

Complementary metal–oxide–semiconductor, abbreviated as CMOS /ˈsiːm?s/, is a technology for constructing integrated circuits. CMOS technology is used in microprocessors, microcontrollers, static RAM, and other digital logic circuits.

What is ECL logic?

In electronics, emitter-coupled logic (ECL) is a high-speed integrated circuit bipolar transistor logic family. ECL uses an overdriven BJT differential amplifier with single-ended input and limited emitter current to avoid the saturated (fully on) region of operation and its slow turn-off behavior.

What is a logic family?

A logic family of monolithic digital integrated circuit devices is a group of electronic logic gates constructed using one of several different designs, usually with compatible logic levels and power supply characteristics within a family. Some such logic families use static techniques to minimize design complexity.

What is the full form of ECL?

Emitter Coupled Logic

What is the full form of TTL?

transistor-transistor logic

What is the meaning of ECL?

Exit Control Lists